MarkusD
User
Es scheint als ob Xicoy/Jetsmunt das Thema „kleine Turbine“ doch nicht aufgegeben hatte (M-35)
Wenn die Spezifikation so ist, dann ist das vermutlich ein deutlich besseres Preis/Leistung/Gewichtsverhältnis als bei der KingTech K 30 - auch die Alternative zu T40/50 da super günstig ��
http://www.xicoyturbines.com/page2.html
1500 EUR + MwSt
The product of the first development by Xicoy is a very small engine, aimed at the small and foamy jet market but incorporating all the latest thinking in mechanical design, digital electronic control and software developments. The engine has very low installed weight, around 400g, tiny case of just 60mm and from tip of starter to end of exhaust of 165mm. It boasts an amazing 45N, 4.5kg or 10LBs of thrust which should be enough to satisfy most jet jockeys flying the small foamy planes, and a extremely low residual thrust of 1.8N , 0,18kg at idle to help with approaches. The engine is full internal kerostart, can start and run happily on kero or diesel and incorporates built-in valves. A simple 3-wire cable and one 4mm pipe are the only connections needed for the engine. A smart, replaceable fod screen is supplied as standard to protect the small compressor against FOD.
The engine incoporates a high speed brushless starter which helps the engine to show an amazing start-to-idle just under 25 seconds, from initiation. A sub miniature, intelligent brushless fuel pump eliminates any need for pump starting or other adjustments. There is no external ECU, this function is built into the pcb on the engine. To connect the battery (2S Lipo, or 3S LiFe) there is a small external unit (Hub) which the battery plugs into, together with the fuel pump, a display (if used) and any additional functions that are added beyond the basic setup, such as telemetry modules, sensors etc. This Hub will also be available soon with a miniature display built on, to eliminate the need for any additional plug-in items. The full installed light package weighs just 470g.
The control system is a completely new single wire control development which benefits from the latest extremely fast and powerful electronics and digital controls. There is no backwards compatibility with any previous FADEC system. This enables the very latest, most capable, and fastest micro-controllers to be used. This gives a system which is highly adaptable and will form the platform for all future Xicoy engine products. The pioneering spirit of Gaspar and Xicoy continues and teamed up with Mike you can be sure many more things will follow, these are exciting times for the hobby!
High power Output: 45N - 10lb
Extremely low residual thrust: 1,8N -0,4lb
Max RPM: 225.000
Minimum RPM: 60.000
Diameter: 60mm
Lenght: 165mm
Engine weight: 398g including mounting strap and FOD filter
Installed weight: 470g (inc Engine, Pump and leads. Not inclusive of battery)
Fuel Comsumption: 20g/min at idle. 140g/min at full power.
Kerosene and diesel fuel + 4% oil
Kerostart fast starting of 25 sec.
Inflight Restart technology. Typically half time than Normal Start.
Brushless fuel pump with integrated controller
High speed Brushless starter motor
All new Fully Integrated ecu
Telemetry for Jeti, Futaba, HoTT, MPX, PB Core, Spektrum, JR and FrSky. (optional module)
Fuel and FOD filter included
Wenn die Spezifikation so ist, dann ist das vermutlich ein deutlich besseres Preis/Leistung/Gewichtsverhältnis als bei der KingTech K 30 - auch die Alternative zu T40/50 da super günstig ��
http://www.xicoyturbines.com/page2.html
1500 EUR + MwSt
The product of the first development by Xicoy is a very small engine, aimed at the small and foamy jet market but incorporating all the latest thinking in mechanical design, digital electronic control and software developments. The engine has very low installed weight, around 400g, tiny case of just 60mm and from tip of starter to end of exhaust of 165mm. It boasts an amazing 45N, 4.5kg or 10LBs of thrust which should be enough to satisfy most jet jockeys flying the small foamy planes, and a extremely low residual thrust of 1.8N , 0,18kg at idle to help with approaches. The engine is full internal kerostart, can start and run happily on kero or diesel and incorporates built-in valves. A simple 3-wire cable and one 4mm pipe are the only connections needed for the engine. A smart, replaceable fod screen is supplied as standard to protect the small compressor against FOD.
The engine incoporates a high speed brushless starter which helps the engine to show an amazing start-to-idle just under 25 seconds, from initiation. A sub miniature, intelligent brushless fuel pump eliminates any need for pump starting or other adjustments. There is no external ECU, this function is built into the pcb on the engine. To connect the battery (2S Lipo, or 3S LiFe) there is a small external unit (Hub) which the battery plugs into, together with the fuel pump, a display (if used) and any additional functions that are added beyond the basic setup, such as telemetry modules, sensors etc. This Hub will also be available soon with a miniature display built on, to eliminate the need for any additional plug-in items. The full installed light package weighs just 470g.
The control system is a completely new single wire control development which benefits from the latest extremely fast and powerful electronics and digital controls. There is no backwards compatibility with any previous FADEC system. This enables the very latest, most capable, and fastest micro-controllers to be used. This gives a system which is highly adaptable and will form the platform for all future Xicoy engine products. The pioneering spirit of Gaspar and Xicoy continues and teamed up with Mike you can be sure many more things will follow, these are exciting times for the hobby!
High power Output: 45N - 10lb
Extremely low residual thrust: 1,8N -0,4lb
Max RPM: 225.000
Minimum RPM: 60.000
Diameter: 60mm
Lenght: 165mm
Engine weight: 398g including mounting strap and FOD filter
Installed weight: 470g (inc Engine, Pump and leads. Not inclusive of battery)
Fuel Comsumption: 20g/min at idle. 140g/min at full power.
Kerosene and diesel fuel + 4% oil
Kerostart fast starting of 25 sec.
Inflight Restart technology. Typically half time than Normal Start.
Brushless fuel pump with integrated controller
High speed Brushless starter motor
All new Fully Integrated ecu
Telemetry for Jeti, Futaba, HoTT, MPX, PB Core, Spektrum, JR and FrSky. (optional module)
Fuel and FOD filter included