FETZ
User
EWD and CG
EWD and CG
Hello Espen
Yes, the information on the installation time is too short. Are not we experts?
The EWD from 1 to 1.5 GRD is a good value and CG of 78mm, fly-ready gliders without wings.
I also recommend the spike tape on the elevator.
These are good values for the first flights!
If you take a pilot for the ASH31, give him a parachute
Good first flight
Regards Jürg (back from the North Cape)
EWD and CG
Mit diesem Schwerpunkt fliege ich und belasse es mal.
Da ich nicht jedes mal den Segler komplett montieren will habe ich den flugfertigen Flieger
ohne Flügel auf die Wage gelegt.
Hi Jürg
I spend another 15 hours to make the model finished this weekend. Total hours are now between 70-100 hours. A lot more than the four hours assembly time according to Ali at Horizon Hobby . According to the manual the CG should be between 60-85 mm. That is a big range and 60 mm is extremely long forward. I have a motor, motor battery and a receiver battery in the nose. Maybe I need more weight and could compensate with a pilot. But are you flying with a CG of 76 mm? And has your EWD of 1,5% any compact on the CG?
Regards
Espen
Hello Espen
Yes, the information on the installation time is too short. Are not we experts?
The EWD from 1 to 1.5 GRD is a good value and CG of 78mm, fly-ready gliders without wings.
I also recommend the spike tape on the elevator.
These are good values for the first flights!
If you take a pilot for the ASH31, give him a parachute
Good first flight
Regards Jürg (back from the North Cape)
Zuletzt bearbeitet: