RSS-Feed anzeigen

sweet

PCBs Production - How to Use Technology to Influence Costs

Bewerten
A Printed Circuit Boards is more of an electrical circuit whose conductors and components are within a mechanical structure. Printed Circuit Boards not only support but also electronically connect elements found in electronic devices, and with the constant changing technology, so does PCBs change.



Technological changes affect almost everything across the globe, and PCBs are not left out. In turn, puts pressure to PCB manufacturers to cope up with the latest trends in the market. As a result, this pressure affects the prices that PCBs production and this article will cover in detail how these different technologies affect PCB cost.

1、How to Choose the Material Cost of PCB

Materials used during the manufacture of a circuit board will invariably affect/impact its cost. Standard or conventional PCBs are laminated using FR4 equipment. However, FR4 document doesn’t suffice for PCBs meant for high-intensity use, such as the ones that are common in fuel industries, aerospace, and control systems.



Some of the factors that are known to impact on the selection of material include thermal reliability, heat transfer, temperature reliability, mechanical properties, and signal performance. Right material used in the manufacture of PCBs must pass the above tests, a reason as to why the cost might be high than usual.



If the board has got the capabilities of withstanding high-intensity loads, then the cost of procuring them will be slightly costly than the rest. Still, if the circuit board can withstand a wide range of temperature changes, among others, expect them to be a bit expensive.



Boards with materials that can facilitate uninterrupted electrical signals while in operation in addition to withstanding a wide range of physical stresses will be costly. As a rule of thumb, activities that require higher frequencies will demand materials of a very high grade than the standard or conventional FR4.

Name:  1_58.jpg
Hits: 57
Größe:  67,4 KB

2、How PCB Size is Affecting Production Costs

Panel utilization and PCBs size constitute crucial factors that affect its price. The number of circuits needed for its corresponding device always determines the size. A PCB meant for something small such as a phone, or digital watch needs fewer components and will be ultimately less costly to manufacture.



However, those meant for a laptop or a computer are often huge and will require a lot of time and other resources. In the manufacture of PCBs, some of the most common dimensions include 18 X 24″ (457 x 610mm) and 18 X 21″ (457 x 533mm).



Another popular dimension that a lot of PCB users highly request is the 21 X 24″ (533 x 610mm) dimension or measurements. The space that gets consumed by the components on a PCB will also affect its price with PCBs with huge dimensions costing more.



For example, a PCB board with dimensions of 18 x 24 consumes more space than an 18 x 21 boards, and a bit costly. In short, the bigger the size of a PCB, the more material that is needed to manufacture it, meaning that its cost will be higher.



However, technology is rapidly changing and impacting how manufacturers try to reduce the size of the PCBs and lower their costs. Put in short, the dimension of a PCB design is one of the main determining factors that impact the overall price of the PCB.



Even if a firm manufacturers small-sized PCBs at high volumes, the total cost is less as opposed to low-volume large printed circuit boards.

Name:  2_58.jpg
Hits: 57
Größe:  44,1 KB

3、Key Factors in PCB Cost: The Number of Layers

Another huge factor that will determine the price of a circuit board is the number of layers in a PCB. The types of materials involved during the manufacturing process and overall resolve pricing differences, thick PCBs require more time and work.



Overall, the cost increases based on layer-by-layer and is as below:

• 10L – 12L: 20 -30%



• 8L – 10L: 20 – 30%



• 6L – 8L: 30 -35%



• 4L – 6L: 30 – 40%



• 2L – 4L: 35 -40%



• 1L – 2L: 35 -40%



A majority of significant increases in the cost of manufacturing is likely when a second layer gets added on the board. But again, cost increases are somewhat less steep the moment a given design crosses or goes over the eight-later threshold.



As a layer gets added, more production steps are involved, a reason as to why its cost might be high compared to the rest. Depending on the type of materials used in a given PCB design, more layers might be needed to ensure that there is a stable composition.

Name:  3_44.jpg
Hits: 58
Größe:  42,9 KB

4、How to Make Exclusive PCB Customization

Unique design that goes into the production of a PCB also affects its price. If you visit a PCB maker having in mind custom specifications, expect the amount to be a bit high than a conventional printed circuit board.



Custom specifications are known for raising the production costs, even if the board is small and probably consisting of a single or two layers. The most significant determining factor that sees prices increasing is determined by whether some of the features need special tools or other skills to achieve.



Some of the examples of unique or custom specifications that a lot of people ask for include solder mask clearance and side-plating. That’s not all. Other users demand their boards to have contoured edges, an aspect that raises their prices.



CUstom features need specialized skills and technicians to produce. Sadly, there aren’t plenty of them around, thereby increasing production costs. If your design is challenging to build with a few PCB makers only having an idea, the price will be high.



Hard-to-manufacture PCBs require specialized tools and time. If the manufacturing time calls for additional hours to complete, expect your board to cost slightly more after that. For instance, if your board needs precise holes of some unusual size that require specific diameters, a production firm may have to procure these tools.



With the above, there’s a high chance that your printed circuit board will be priced a little bit higher than those that lack such features.

5、Aspect Ratio and PCB Thickness

Until recently, the thickness of PCBs played a negligible role in their cost. This situation is expected to change in the coming years. Denser materials are costlier to procure and laminate as opposed to thin materials that go into the manufacture of printed circuit boards.



If the design of the printed circuit board happens to be highly intricate, the process of laminating it might be a bit expensive or costly. A majority of electronic device manufacturers and users in need of thick PCBs have reported high costs associated with them based on their thickness.



Thinner materials generally make PCBs that use them to fit into a lower cost bracket since you need less material to manufacture them. But since thickness can also be affected by the type of material used, rest assured of higher costs with PCBs made of thick materials.



Generally, the typical thickness of a PCB is 1.6mm, but with times changing, thicker boards are becoming even more expensive or costlier to procure. Also though there has been no establishment of the going rate of the industry, generally PCBs made of thick materials are expensive to acquire.



Still, the overall price of a thicker PCB may be significantly higher, especially if it has got an increased aspect ratio. Multiple layers make the printed circuit boards slightly thicker, an aspect that makes its cost to be high also.



While different manufacturers of PCBs will charge you differently depending on the thickness of the board, generally, thicker boards will cost more than thin ones.

6、PCBs Minimum Space and Trace

For current to transfer on a PCB without the fear of some overheating and subsequently damaging the whole board, sufficient trace width must be present. On PCBs of all sizes, there’s a simple correlation existing between the carrying capacity and the trace width.



Of importance to note though is that the carrying capacity of trace doesn’t necessarily correspond to space in the cross-section. Again, the amount of current that can be held by evidence, at maximum, is not easy to calculate, irrespective of the width of the trace.



Vias and other elements on the board can affect the carrying capacity of the current. Boards with numerous pads may experience a trace of outstanding ability. If you do not account for this factor during the soldering process, there might be some excessive cross-sectional area with the probability of transient surges occurring.



To prevent the above situations, PCB makers tend to enlarge the width of the trace or add extra solder mask to these traces. With this and plenty of other factors, you’ll realize that the price of PCBs tends to go high than expected.

7、Conclusion

With the unquenchable need for PCBs, the material properties of a PCB, size, unique specifications, and thickness among others can significantly affect its price. It’s wise to manufacture PCB equipment beforehand to determine what will fit your needs. At WellPCB, we work with every customer to ensure that they can get their boards the way they need and want them to be.

"PCBs Production - How to Use Technology to Influence Costs" bei Google speichern "PCBs Production - How to Use Technology to Influence Costs" bei del.icio.us speichern "PCBs Production - How to Use Technology to Influence Costs" bei Digg speichern

Kommentare